29th November 2007

This post is more for the guys at CRC so I can get some help removing the back axle. I'm doing that because I want to change the differential ratios for something that will give a bit more acceleration.

OK, so here goes, will the axle drop if I just release the four lower ends of the springs? and either the front or back of the radius arms? Or do the fulcrum shafts have to come out too? Plus of course the prop shaft.

At the back the radius arm bolts look like they will hit the lower suspension points, at the front the bolts look like they will have to come up through the floor which means cutting it.

The top of the diff seems to be sealed to the frame with a rubber block? Is it stuck or will it come free?